IT Essentials v7.0 v8.0 Chapter 1 - 9 Skills Assessment Exam Answers (2024)

Chapter 1 -9 Skills Assessment Answers Full 100%

IT Essentials v7 & v8.0 220-1001 Skills Assessment (Instructor Version)

Instructor Note: Red font color or gray highlights indicate text that appears in the Instructor copy only.

Topology

IT Essentials v7.0 v8.0 Chapter 1 - 9 Skills Assessment Exam Answers (1)

IT Essentials 7.0 & 8.0 Chapter 1 -9 Skills Assessment

Background / Scenario

You will disassemble / assemble a computer, install an OS and add this new computer onto a network and install the network printer. You will also install a Linux VM.

Required Resources

  • A lab computer to take apart and rebuild
  • Windows 10 ISO, Linux ISO, Packet Tracer and Oracle VirtualBox executables

Instructor Note: This Skills Assessment (SA) was designed with flexibility in mind. Depending on the needs of the classroom, you can choose the number of tasks or the order of the tasks that will be performed in this SA.

Some suggested ways to organize this SA for students:

  • SA A: Tasks 1 – 5
  • SA B: Tasks 3 – 5, then Tasks 1 -2
  • SA C: Tasks 3 – 5: assumption: The lab PC has been assembled already.
  • SA D: Tasks 4 – 5: assumption. The Windows OS is already installed on the lab PC.

Instructions

Task 1: Disassemble a Computer

Introduction to Personal Computer Hardware: Lab – Disassemble a Computer

Instructor Note: This is a suggested list. Depending on the motherboard, the NIC and the video adapter may be built into the motherboard, and cannot be removed.

In this part, you will remove the following hardware components listed in the table using the proper safety procedures. If the components cannot be removed from the case, you will need to be able identify them. Your Instructor will verify that you have removed the correct hardware components and can identify the listed components and their uses.

Points for safety procedure: _____ (5 points)

HardwareRemovedIdentified / UsesPoints
Hard drive / Optical driveYesYes1
NIC / Wireless NICYesYes1
RAMYesYes1
Power supplyYesYes1
CPU / Heat-sinkYesYes1
Case fansYesYes1
Video adapterYesYes1
Internal cablesYesYes1
External cablesYesYes1
MotherboardYesYes1

Instructor Sign-Off Task 1: __________

Points: __________ of 15

Task 2: Reassemble the Computer and Troubleshooting

PC Assembly:

  • Lab – Install the Power Supply
  • Lab – Install the Drives
  • Lab – Install the Adapter Cards
  • Lab – Install the Motherboard
  • Lab – Install Internal Cables
  • Lab – Install Front Panel Cables
  • Lab – Complete the Computer Assembly

Instructor Note: Incorrect parts or cables can be provided to the students so they must troubleshoot and identify a solution.

In this task, you will reassemble the computer so it can be powered on.

HardwareAssembledIssues encounteredPoints
Hard drive / Optical driveYesYes1
NIC / Wireless NICYesYes1
RAMYesYes1
Power supplyYesYes1
CPU / Heat-sinkYesYes1
Case fansYesYes1
Video adapterYesYes1
Internal cablesYesYes1
External cablesYesYes1
MotherboardYesYes1
What are the 5 basic troubleshooting steps for a computer?
Answer in the box to the right.
1- Identify the problem
2- Determine the probable cause
3- Establish a plan to resolve the problem and implement the solution
4- Verify the system functionality and implement preventative measures
5- Document findings, actions, and outcomes
1- Problem: Computer stuck in a reboot loop
Cause/solution: RAM was installed in the wrong slot/install ram in the right slot

2- Problem: Computer not booting up
Cause/solution: Front panel connectors (JFP1) misconnected/Properly connect front panel header

3- Problem: Computer POST but no OS is loading up
Cause/solution: HDD not working/replace HDD

5

Instructor Sign-Off Task 2: __________

Points: __________ of 10

Task 3: Configure the BIOS / UEFI and Install Windows 10

Advanced Computer Hardware:

  • Lab – Investigate BIOS Settings
  • Lab – Install Windows

Instructor Note: A Windows ISO image should be provided to the students. It can be on a DVD or USB. Prior to the start of this task, change the BIOS / UEFI settings to boot from the hard drive first.

In this task, you will configure the BIOS / UEFI so an OS can be installed from a DVD or USB. The Instructor will provide you a Windows ISO image to install Windows on the PC.

  • Configure the BIOS or UEFI to read the ISO image on a DVD or USB as directed by the Instructor.
  • Install Windows: User account info: ITEadmin / ITEpassword
  • Boot into Windows

Instructor Sign-Off Task 3: __________

Points: __________ of 10

Task 4: Networking

Instructor Note: The students will need an assigned subset for DHCP when configuring their SOHO routers. For those classrooms with more time, an IP address pool could be configured on the router with specific addressing information provided for students to use when configuring the PC connection information.

Your Instructor will provide you with an assigned subset for DHCP.

Configuration Item or TaskSpecificationPoints
Configure SOHO routerwired/wireless connection using DHCP

Change the default admin password: ITEadmin / ITEpassword

4
Configure the PC to join a local network wirelessly2
Connect a mobile device to the network2
Install and access a network printer. If a network printer is not available, a local printer can be used to print a test page2

Instructor Sign-Off Task 4: __________

Points: __________ of 10

Task 5: Use Third Party Software

Virtualization and Cloud Computing:

  • Lab – Install Linux in a Virtual Machine

Instructor Note: Either provide a USB flash drive / DVD with Linux ISO image and Oracle VirtualBox and Packet Tracer executables or a classroom with the necessary files.

Configuration Item or TaskSpecificationPoints
Install Oracle VirtualBox2
Create a VM using the Linux ISO image2
Install Packet Tracer2
With Packet Tracer, create a simple network:Add and cable these devices together: SOHO router, one generic PC (PC-PT)
  • Configure the following for the SOHO router
  • DHCP “Start IP Address”: 192.168.0.150
  • Maximum number of DHCP users: 1
  • Basic wireless settings:
    • Wireless N only
    • SSID: SBA-Your name.
    • Channel: 6
    • Enable SSID broadcasting
  • Wireless devices connected to the SOHO router: Tablets and Smartphone
  • Configure the laptop with a static IP address and connect to the SOHO router.

Verify connectivity between all devices.

14

Instructor Sign-Off Task 5: __________

Points: __________ of 20

IT Essentials v7.0 v8.0 Chapter 1 - 9 Skills Assessment Exam Answers (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Kelle Weber

Last Updated:

Views: 5435

Rating: 4.2 / 5 (73 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Kelle Weber

Birthday: 2000-08-05

Address: 6796 Juan Square, Markfort, MN 58988

Phone: +8215934114615

Job: Hospitality Director

Hobby: tabletop games, Foreign language learning, Leather crafting, Horseback riding, Swimming, Knapping, Handball

Introduction: My name is Kelle Weber, I am a magnificent, enchanting, fair, joyous, light, determined, joyous person who loves writing and wants to share my knowledge and understanding with you.